Residential Commercial Ultra-low pressure membrane element Extremely low pressure series High-desalination membrane element High flux brackish Series Oxidation Resistance brackish series Fouling Resistance membrane element High desalination of seawater membrane element High flux membrane desalination membrane element
Internal pressure Tubular Membrane Submerged Column-Type Submerged MBR Horizontal UF Membrane External pressure
The vast majority of membrane components on the market are applicable to the pH range of feed solution 2-11. However, many pharmaceutical / biochemical / food industrial applications require production under harsh acid conditions.
Inc membrane has super stability and meets the application requirements of high and low pH value, high temperature (up to 158 ° f or 70 ° C) and organic media in the market.
The acid resistant membrane element with rich membrane is suitable for stable operation in the pH range of 0-12.
Suitable for applications requiring severe chemical cleaning (CIP). It is suitable for recovering high-temperature acid-base cleaning solution. The recovered cleaning solution can be reused directly, which solves the problem of waste liquid discharge and reduces the production cost
Specification Parameter | |||||
Model | Removal rate % | Water yield | Membrane Area | inlet passage | |
Glucose、Sucrose | Nacl | gpd（m³/d） | ft2 (m2) | mil（mm） | |
FFM-N2540GBA-200 | 95/97 | 35 | 610(2.3) | 17.2(1.6) | 30（0.8） |
FFM-N4040GBA-200 | 95/97 | 35 | 2240(8.5) | 60.3(5.6) | 30（0.8） |
95/97 | 35 | 1520(5.8) | 43(4.0) | 46（1.2） | |
FFM-N8040GA-200 | 95/97 | 35 | 6500(24.6) | 308(28.6) | 30（0.8） |
95/97 | 35 | 5000(18.9) | 210(19.5) | 46（1.2） | |
For acid resistant membrane parts, see the following table for typical acid solutions applied (molecular weight above 1000)
solution | concentration |
HCI | 10 % |
H2SO4 | 10 % |
H3PO4 | 15 % |
HNO3 | 2 % |
OPERATION PARAMETERS （2540/4040）
Recommended operating pressure：
220-510 psi (15-35bar)
Maximum operating temperature：
122°F (50℃)
PH range of continuous operation：
0-12
PH range of online cleaning:
0-12
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
60 psi (4.2bar)
OPERATION PARAMETERS （8040）
Recommended operating pressure：
220-510 psi (15-35bar)
Maximum operating temperature：
158°F (70℃)
PH range of continuous operation：
0-12
PH range of online cleaning:
0-12
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
50 psi (3.5bar)
The vast majority of membrane components on the market are applicable to the pH range of feed solution 2-11. However, many pharmaceutical / biochemical / food industrial applications require production under harsh acid conditions.
Inc membrane has super stability and meets the application requirements of high and low pH value, high temperature (up to 158 ° f or 70 ° C) and organic media in the market.
The acid resistant membrane element with rich membrane is suitable for stable operation in the pH range of 0-12.
Suitable for applications requiring severe chemical cleaning (CIP). It is suitable for recovering high-temperature acid-base cleaning solution. The recovered cleaning solution can be reused directly, which solves the problem of waste liquid discharge and reduces the production cost
Specification Parameter | |||||
Model | Removal rate % | Water yield | Membrane Area | inlet passage | |
Glucose、Sucrose | Nacl | gpd（m³/d） | ft2 (m2) | mil（mm） | |
FFM-N2540GBA-200 | 95/97 | 35 | 610(2.3) | 17.2(1.6) | 30（0.8） |
FFM-N4040GBA-200 | 95/97 | 35 | 2240(8.5) | 60.3(5.6) | 30（0.8） |
95/97 | 35 | 1520(5.8) | 43(4.0) | 46（1.2） | |
FFM-N8040GA-200 | 95/97 | 35 | 6500(24.6) | 308(28.6) | 30（0.8） |
95/97 | 35 | 5000(18.9) | 210(19.5) | 46（1.2） | |
For acid resistant membrane parts, see the following table for typical acid solutions applied (molecular weight above 1000)
solution | concentration |
HCI | 10 % |
H2SO4 | 10 % |
H3PO4 | 15 % |
HNO3 | 2 % |
OPERATION PARAMETERS （2540/4040）
Recommended operating pressure：
220-510 psi (15-35bar)
Maximum operating temperature：
122°F (50℃)
PH range of continuous operation：
0-12
PH range of online cleaning:
0-12
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
60 psi (4.2bar)
OPERATION PARAMETERS （8040）
Recommended operating pressure：
220-510 psi (15-35bar)
Maximum operating temperature：
158°F (70℃)
PH range of continuous operation：
0-12
PH range of online cleaning:
0-12
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
50 psi (3.5bar)
