Residential Commercial Ultra-low pressure membrane element Extremely low pressure series High-desalination membrane element High flux brackish Series Oxidation Resistance brackish series Fouling Resistance membrane element High desalination of seawater membrane element High flux membrane desalination membrane element
Internal pressure Tubular Membrane Submerged Column-Type Submerged MBR Horizontal UF Membrane External pressure
Product Specification:
Product Model | Membrane Area ft² （m²） | Test pressure psi （bar） | Water yield gpd （l/h） | Desalination rate % |
1812NL-100 | 4 (0.37) | 60 （4.1） | 100 (15.7) | 96（35） |
FFM1812NL-130 | 6 (0.46) | 60 （4.1） | 130 (20.5) | 96（35） |
FFM2012NL-160 | 7 (0.47) | 60 （4.1） | 160 (25.2) | 97（35） |
FFM2812NL-250 | 10 (0.93) | 60 （4.1） | 250 (39.4) | 97（35） |
FFM2812NL-300 | 12 (1.16) | 60 （4.1） | 300 (47.2) | 97（35） |
FFM3013NL-400 | 14 (1.30) | 60 （4.1） | 400 (63.0) | 97（35） |
1. Test conditions: 250ppm NaCl solution, 25℃ water temperature, 15% recovery;
2. The water yield of a single membrane element may vary within a range of + / - 20%.
3. After product renewal, the performance parameters of membrane components may change.
OPERATION PARAMETERS：
Maximum operating temperature:113 ℉（45℃）
Maximum operating pressure: 290 psi (20 bar)
Maximum pressure drop: 15 psi (1.0 bar)
PH range, continuous operation: 2-11
PH range, short term cleaning (30 minutes): 1-13
Maximum feed water SDI15: 5
Allowable free chlorine content:＜0.1ppm
For special applications, please contact FFM Inc
Product Specification:
Product Model | Membrane Area ft² （m²） | Test pressure psi （bar） | Water yield gpd （l/h） | Desalination rate % |
1812NL-100 | 4 (0.37) | 60 （4.1） | 100 (15.7) | 96（35） |
FFM1812NL-130 | 6 (0.46) | 60 （4.1） | 130 (20.5) | 96（35） |
FFM2012NL-160 | 7 (0.47) | 60 （4.1） | 160 (25.2) | 97（35） |
FFM2812NL-250 | 10 (0.93) | 60 （4.1） | 250 (39.4) | 97（35） |
FFM2812NL-300 | 12 (1.16) | 60 （4.1） | 300 (47.2) | 97（35） |
FFM3013NL-400 | 14 (1.30) | 60 （4.1） | 400 (63.0) | 97（35） |
1. Test conditions: 250ppm NaCl solution, 25℃ water temperature, 15% recovery;
2. The water yield of a single membrane element may vary within a range of + / - 20%.
3. After product renewal, the performance parameters of membrane components may change.
OPERATION PARAMETERS：
Maximum operating temperature:113 ℉（45℃）
Maximum operating pressure: 290 psi (20 bar)
Maximum pressure drop: 15 psi (1.0 bar)
PH range, continuous operation: 2-11
PH range, short term cleaning (30 minutes): 1-13
Maximum feed water SDI15: 5
Allowable free chlorine content:＜0.1ppm
For special applications, please contact FFM Inc
