Residential Commercial Ultra-low pressure membrane element Extremely low pressure series High-desalination membrane element High flux brackish Series Oxidation Resistance brackish series Fouling Resistance membrane element High desalination of seawater membrane element High flux membrane desalination membrane element
Internal pressure Tubular Membrane Submerged Column-Type Submerged MBR Horizontal UF Membrane External pressure
FFM Inc's membrane rich ultra-low pressure series reverse osmosis membrane has the advantages and characteristics of high desalination rate and low operating pressure. The conventional operating pressure range is 0.8 ~ 1.2MPa. Ultra low pressure series reverse osmosis membrane is mainly used for municipal tap water, groundwater and surface water with low to medium salt content. Its operating pressure is about 2 / 3 of that of conventional low pressure composite membrane, and the desalination rate can reach 99.5%. LP ultra-low voltage series greatly reduces the equipment manufacturing cost and equipment operation cost, so the economic benefit is obvious. Ultra low pressure series reverse osmosis membranes are widely used in water purification plants, food, beverage, dairy products, drinking water, electronics, medicine and other light industries.
Product Specification:
Product Model | Membrane Area ft² （m²） | Test pressure psi （bar） | Water yield gpd （m³/d） | Desalination rate % |
2521LP | 14（1.3） | 150 （10） | 300 （1.1） | 99 |
FFM2540LP | 30（2.8） | 150 （10） | 750 (2.8) | 99 |
FFM4021LP | 36（3.4） | 150 （10） | 950 (3.6) | 99 |
FFM4040LP | 85（7.9） | 150 （10） | 2100 （7.9） | 99.6 |
FFM8040LP-375 | 375（34.9） | 150 （10） | 10000 （37.8） | 99.6 |
FFM8040LP-400 | 400（37.2） | 150 （10） | 10500 （39.7） | 99.6 |
FFM8040LP-440 | 440（38.1） | 150 （10） | 12500 （47.3） | 99.6 |
1. Test conditions: 1500ppm NaCl solution, 25℃ water temperature, The recovery of 2521 / 4021 is 8%;The recovery of 2540/4040/8040is 15%.
2. The water yield of a single membrane element may vary within a range of + / - 20%.
3. After product renewal, the performance parameters of membrane components may change.
OPERATION PARAMETERS：
Maximum operating temperature:113 ℉（45℃）
Maximum operating pressure: 600 psi (41 bar)
Maximum pressure drop: 15 psi (1.0 bar)
PH range, continuous operation: 2-11
PH range, short term cleaning (30 minutes): 2-12
Maximum feed water SDI15: 5
Allowable free chlorine content:＜0.1ppm
For special applications, please contact FFM Inc
Product Specification:
Product Model | Membrane Area ft² （m²） | Test pressure psi （bar） | Water yield gpd （m³/d） | Desalination rate % |
2521LP | 14（1.3） | 150 （10） | 300 （1.1） | 99 |
FFM2540LP | 30（2.8） | 150 （10） | 750 (2.8) | 99 |
FFM4021LP | 36（3.4） | 150 （10） | 950 (3.6) | 99 |
FFM4040LP | 85（7.9） | 150 （10） | 2100 （7.9） | 99.6 |
FFM8040LP-375 | 375（34.9） | 150 （10） | 10000 （37.8） | 99.6 |
FFM8040LP-400 | 400（37.2） | 150 （10） | 10500 （39.7） | 99.6 |
FFM8040LP-440 | 440（38.1） | 150 （10） | 12500 （47.3） | 99.6 |
1. Test conditions: 1500ppm NaCl solution, 25℃ water temperature, The recovery of 2521 / 4021 is 8%;The recovery of 2540/4040/8040is 15%.
2. The water yield of a single membrane element may vary within a range of + / - 20%.
3. After product renewal, the performance parameters of membrane components may change.
OPERATION PARAMETERS：
Maximum operating temperature:113 ℉（45℃）
Maximum operating pressure: 600 psi (41 bar)
Maximum pressure drop: 15 psi (1.0 bar)
PH range, continuous operation: 2-11
PH range, short term cleaning (30 minutes): 2-12
Maximum feed water SDI15: 5
Allowable free chlorine content:＜0.1ppm
For special applications, please contact FFM Inc
